{"id":841,"date":"2026-10-11T01:51:11","date_gmt":"2026-10-11T01:51:11","guid":{"rendered":"https:\/\/aft-forge.jk-ideaweb.com\/?post_type=product&#038;p=841"},"modified":"2026-10-19T11:28:33","modified_gmt":"2026-10-19T11:28:33","slug":"steer-tube","status":"publish","type":"product","link":"https:\/\/aft-forge.com\/en\/product\/steer-tube\/","title":{"rendered":"Steer Tube"},"content":{"rendered":"<h2 style=\"text-align: left;\">Aluminum Bicycle Steerer Tube: Variable-Diameter Fork Steerer<\/h2>\n<p style=\"text-align: left;\">The aluminum bicycle steerer tube is the steering column of a fork. Its upper end passes through the frame&#8217;s head tube and is clamped by the stem, while its lower end joins the fork crown. This version is a long slender tube with a change in outer diameter and a thickened lower section for press-fitting or joining to the crown and for carrying bending loads from steering and braking; variable-diameter designs are also common in tapered head tube systems with different upper and lower bearing sizes.<\/p>\n<p style=\"text-align: left;\">The joint between steerer and crown sees the highest bending stress and needs a thicker wall, while the upper section can use a thinner wall to save weight. Al Forge Tech (AFT) evaluates cold forming for the diameter change and wall thickness, finish-turns the outer diameter and joint section, and inspects diameter, roundness and straightness on CMM. Anodizing is available.<\/p>\n<h3 style=\"text-align: left;\">Key Features<\/h3>\n<ul style=\"text-align: left;\">\n<li>Thickened, stepped lower section strengthens the crown joint<\/li>\n<li>Thin-wall upper section saves weight<\/li>\n<li>OD, roundness and straightness finish-turned and measured<\/li>\n<li>Can be developed together with the triple clamp<\/li>\n<\/ul>\n<h2 style=\"text-align: left;\">Aluminum Bicycle Steerer Tube Specifications and Manufacturing Capability<\/h2>\n<div class=\"table-container\" style=\"text-align: left;\">\n<table class=\"table table-bordered table-striped\">\n<thead>\n<tr>\n<th>Item<\/th>\n<th>Details<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Product category<\/td>\n<td>Aluminum Forging Bicycle Parts<\/td>\n<\/tr>\n<tr>\n<td>Application<\/td>\n<td>Fork steerer tubes for bicycles and e-bikes<\/td>\n<\/tr>\n<tr>\n<td>Primary process<\/td>\n<td>Cold forming (cold forging presses 260T\u20132,500T), evaluated by diameter change and wall thickness<\/td>\n<\/tr>\n<tr>\n<td>Material<\/td>\n<td>Selected to customer specification; 2xxx, 5xxx, 6xxx and 7xxx series aluminum alloys available (e.g. 2014, 6061, 6082, 7075)<\/td>\n<\/tr>\n<tr>\n<td>Heat treatment<\/td>\n<td>In-house T4 solution treatment (8 units) and T6 artificial aging (7 units), set by alloy and strength requirement<\/td>\n<\/tr>\n<tr>\n<td>Secondary machining<\/td>\n<td>CNC machining (52 machining centers, 30 lathes), deburring, vibratory finishing<\/td>\n<\/tr>\n<tr>\n<td>Surface finish<\/td>\n<td>Anodizing (including hard anodizing), shot blasting, e-coating or painting, as required<\/td>\n<\/tr>\n<tr>\n<td>Inspection<\/td>\n<td>Zeiss CMM (4 units), hardness testers, spectrometer, fluorescent penetrant inspection line<\/td>\n<\/tr>\n<tr>\n<td>Dimensions and tolerances<\/td>\n<td>Per customer 2D\/3D drawings<\/td>\n<\/tr>\n<tr>\n<td>Quality system<\/td>\n<td>IATF 16949:2016, ISO 14001:2015<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<h2 style=\"text-align: left;\">Aluminum Bicycle Steerer Tube Manufacturing Process<\/h2>\n<ol style=\"text-align: left;\">\n<li><strong>Drawing review and DFM<\/strong>: we confirm alloy, load direction and critical dimensions, then run QForm simulation to predict metal flow and defect risk.<\/li>\n<li><strong>Die design and manufacturing<\/strong>: the number of die sets (for example, blocker and finisher dies) is planned around part complexity, and die contours are checked with a portable 3D scanner.<\/li>\n<li><strong><a href=\"https:\/\/aft-forge.com\/forging-service\/cold-forging-service\/\">Cold forging<\/a><\/strong>: cold forming on 260T\u20132,500T presses, suited to thin-walled, tubular and dimensionally repeatable parts.<\/li>\n<li><strong>Heat treatment<\/strong>: T4 solution treatment and T6 artificial aging are performed in-house, with parameters set by alloy and strength requirement.<\/li>\n<li><strong><a href=\"https:\/\/aft-forge.com\/forging-service\/aluminum-cnc-machining-services\/\">CNC machining<\/a> and finishing<\/strong>: holes, threads and mating surfaces are machined, followed by deburring, vibratory finishing, shot blasting or anodizing as required.<\/li>\n<li><strong>Inspection and shipment<\/strong>: dimensions, hardness and chemical composition are verified with CMM, hardness testers and a spectrometer, with lot traceability kept under IATF 16949.<\/li>\n<\/ol>\n<div id=\"prodNav\" style=\"text-align: left;\">\n<div class=\"tab-content responsive\">\n<div id=\"contentprod0\" class=\"tab-pane active txtNormal\">\n<h2>FAQ<\/h2>\n<h3>Why is the lower end of the steerer thickened?<\/h3>\n<p>When riding and braking, front-wheel loads pass through the fork to the lower end of the steerer, where it joins the crown and bending stress is highest. The lower end therefore needs a thicker wall and larger diameter, while the less-stressed upper section can use a thinner wall to save weight. This variable section balances weight and strength.<\/p>\n<h3>Can AFT produce both the steerer tube and the triple clamp?<\/h3>\n<p>Yes. AFT produces both bicycle triple clamps and steerer tubes and can plan their fit dimensions and tolerances together from the fork assembly drawing, for example press-fit interference or joining method, with unified alloy and heat treatment specifications to reduce assembly fit issues.<\/p>\n<h3>How do you keep the Aluminum Bicycle Steerer Tube consistent from lot to lot?<\/h3>\n<p>Al Forge Tech runs incoming (IQC), in-process (IPQC) and final (FQC) inspection under IATF 16949:2016, supported by 4 Zeiss CMMs, hardness testers, a spectrometer and a fluorescent penetrant inspection line. First, middle and last pieces of every lot are checked against the die; when wear causes dimensional drift, the die is reworked to keep the Aluminum Bicycle Steerer Tube stable across lots.<\/p>\n<h3>Can the Aluminum Bicycle Steerer Tube be anodized or given other surface finishes?<\/h3>\n<p>Yes. Al Forge Tech offers anodizing (including hard anodizing), shot blasting, vibratory finishing, e-coating and painting, plus pickling and ultrasonic washing lines to clean parts after machining. Please note the finish type and film thickness on the drawing so machining allowances and cosmetic standards for the Aluminum Bicycle Steerer Tube can be evaluated together.<\/p>\n<h3>What information do you need to quote the Aluminum Bicycle Steerer Tube?<\/h3>\n<p>Please send a 3D model and 2D drawing, alloy grade and temper, critical tolerances, surface finish requirements, estimated annual volume and target delivery date. Complete data lets our engineers judge forging feasibility, the number of die sets and the machining scope for the Aluminum Bicycle Steerer Tube at the quotation stage. If the design is still conceptual, a sketch is enough to start a DFM discussion.<\/p>\n<h2>Request a Quote for the Aluminum Bicycle Steerer Tube<\/h2>\n<p>Developing a new Aluminum Bicycle Steerer Tube or converting an existing part to aluminum forging? Send us your 3D\/2D drawings, alloy and temper, annual volume and finishing requirements. Our engineering team will reply with a feasibility review, die plan and quotation.<\/p>\n<ul>\n<li>Online inquiry: <a href=\"https:\/\/aft-forge.com\/contact-us\/\">Contact Us<\/a><\/li>\n<li>Email: <a href=\"mailto:aft@aft-forge.com.tw\">aft@aft-forge.com.tw<\/a><\/li>\n<\/ul>\n<p>To compare similar parts, browse <a href=\"https:\/\/aft-forge.com\/bicycle-parts-bike-parts\/\">Aluminum Forging Bicycle Parts<\/a>\u00a0and our <a href=\"https:\/\/aft-forge.com\/category\/applications\/\">automotive aluminum forging applications<\/a>, or visit <a href=\"https:\/\/aft-forge.com\/about-us\/\">About Us<\/a> for our equipment and certifications.<\/p>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>Aluminum Bicycle Steerer Tube: Variable-Diameter Fork Steerer The aluminum bicycle steerer tube is the steering column of a fork. Its upper end passes through the frame&#8217;s head tube and is clamped by the stem, while its lower end joins the fork crown. This version is a long slender tube with a change in outer diameter [&hellip;]<\/p>\n","protected":false},"featured_media":842,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[24],"product_tag":[],"class_list":["post-841","product","type-product","status-publish","has-post-thumbnail","product_cat-bicycle-parts-bike-parts","first","instock","taxable","shipping-taxable","product-type-simple"],"acf":[],"_links":{"self":[{"href":"https:\/\/aft-forge.com\/en\/wp-json\/wp\/v2\/product\/841","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/aft-forge.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/aft-forge.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/aft-forge.com\/en\/wp-json\/wp\/v2\/comments?post=841"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/aft-forge.com\/en\/wp-json\/wp\/v2\/media\/842"}],"wp:attachment":[{"href":"https:\/\/aft-forge.com\/en\/wp-json\/wp\/v2\/media?parent=841"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/aft-forge.com\/en\/wp-json\/wp\/v2\/product_brand?post=841"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/aft-forge.com\/en\/wp-json\/wp\/v2\/product_cat?post=841"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/aft-forge.com\/en\/wp-json\/wp\/v2\/product_tag?post=841"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}